This wrench is developed to meet the specific needs and expectation on production lines. This type of wrench breaks at an angle of 20 degrees, when the set torque is achieved. This prevents the overloading of the torque, also for not skilled operators. The original inner mechanism ensures repeatable accuracy.
- Range from 5 to 120 Nm
- 20° single direction release
- Pre-set, the desired torque must be set using a torque analyzer
- Compact and strong
- Automatic reset
- Right hand use
- Guaranteed accuracy ± 3% in accordance with EN ISO 6789:2003
- Traceable calibration certificate through accredited laboratories.
